System information

Using Flash Cards with the Network Station

Appendix A, “Flash Card Scenarios” on page 255 has more information

about the files required to support the NC Navigator, Java, and so on, from

the Flash card.

2. Copy the module files into the

/QIBM/ProdData/NetworkStation/nsflash/mods

directory by entering the

following command:

COPY OBJ('/QIBM/ProdData/NetworkStation/mods/filename')

TODIR('/QIBM/ProdData/NetworkStation/nsflash/mods')

The

filename

is:

• actlogin.nws

• colormap.nws

• export.nws

• filed.nws

• libconf.nws

• libmlc.nws

• libprapi.nws

• libprxapi.nws

• mcuis.nws

• miscpr32.nws

• mwm.nws

• nfsd.nws

• ns3270.nws

• ns5250.nws

• ns5250xx.nws

• sbcs_im.nws

• seriald.nws

• setup.nws

In this scenario, we use a Flash card that is only 8MB in size. We only have

enough room to place the compressed kernel on this card (denoted by the .Z

extension), and not the uncompressed kernel which is about 4MB in size.

Consequently, in this scenario, we do not intend to boot any IBM Network

Station Series 1000s from this Flash card.

The files specific to the Series 1000 are denoted by the .63 in the extension.

The number 63 relates to the processor found in the Series 1000, the 603e

RISC chip.

Note