System information

Introduction
9
Figure 2. Separation of Servers - Load Balancing Example
For additional information on how to use the separation of servers function
to enable user roaming and provide load balancing, refer to the manual
IBM Network Station Manager Installation and Use, SC41-0664. This
manual and others are available on-line at the Web site:
www.ibm.com/nc/pubs
Split Boot server is discussed in Chapter 4, “Remote Servers and Split
Boot Servers” on page 107.
Authentication
Server
Terminal
Configuration
Server
DHCP Server
10.1.1.2
10.2.1.2
Base Code
Server
Base Code
Server
10.3.1.2
10.4.1.2
IBM Network Station
All servers must be running IBM Network Station Manager Version 1
Release 3 to use separation of servers. However, as mentioned above, an
exception to this is the BOOTP/DHCP server. A DHCP or BOOTP server
does
not need the IBM Network Station Manager licensed product installed
as long as it is not providing any of the other separation of server functions.
Important