System information

Using a Network Station to Access Mail
237
8.3.2.1 Selecting Mail Options
The first time you start NC Navigator mail, you may need to enter some
information.
1. From NC Navigator display, click
Options
—>
Mail and News
Preferences.
2. Click the
Servers
tab. The display in Figure 143 is shown.
Figure 143. NC Navigator: Mail & News Preferences Display
3. To access e-mail on POP3 server, you must provide the server
information. As shown in Figure 143, enter the following information:
•
SMTP Server
—For example:
sysnam.mycompany.com . If the field is
disabled, ask your system administrator to enter it using IBM Network
Station Manager. In this example,
sysnam is the SMTP server that runs
on the AS/400 and the domain name is
mycompany.com.
•
POP3 Server
—For example:
sysnam.mycompany.com . In this example
we use the same AS/400 system for both the SMTP and POP3 server.
•
User Name
—For example:
jdoe .
4. To allow your mail recipient to see your identity on incoming e-mail
messages, click on
Identity
tab, and enter the information: