System information

210
AS/400 IBM Network Station: Techniques for Deployment in a WAN
3. From the file pulldown menu select
Terminal.
4. Select
Preferences
5. Change the
Buffer size to
9999
, as shown in to Figure 122. This enables
you to scroll back through the entire console log file.
Figure 122. TELNET Terminal Preferences
6. Click on
OK
.
7. Select
Connect
from the file pull down menu.
8. Click on
Remote System
.
9. Enter the TCP/IP address of the desired Network Station and the console
log port ID of
5998
. Please refer to Figure 123.
Figure 123. TELNET Terminal Connection Dialog Box
10.Click on
Connect
.
11.The console scrolls by as it fills up the buffer space within the Telnet
Terminal session. The vertical scroll bar enables you to scroll back through
the log file.