System information

207
Figure 117. Set Configuration Parameters Display (Before Bootup)
The Network Station is now ready to be powered up. The messages seen on
the initial display, when the Network Station is powering up, are similar to
what is shown in Figure 118.
Figure 118. Sample Messages on Network Station during Startup
The NS1090 message shows that the Network Station has contacted the As2
system, which has an IP address of 10.1.1.50.
When the bootup is completed, a login display is shown from the 10.1.1.50
system, As2.
If the Setup Utility is now reviewed, on the Network Station, the display shows
updated information as shown in Figure 119 on page 208 and Figure 120 on
page 208.
IBM Network Station
Set Configuration Parameters
Configuration File ..........................
Configuration Directory:
First ..................................... /QIBM/ProdData/NetworkStation/con
figs/
Second ....................................
Configuration Host Protocol:
First ..................................... Default
Second .................................... Default
NS0500 Search for Host System ...
NS0930 Attempting to use DHCP ...... successful
NS1090 System 10.1.1.50 contacted from 10.1.1.194
NS0520 Request startup information ...
NS0530 Loading startup information ...