System information

204
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 113. Operations Navigator - Modified DHCP Configuration Display
11.Close the DHCP window. You are prompted to update the server. Click
Yes
on this window. If the server is already running, stop and restart the server
from Operations Navigator.
5.9.8 Ensuring the Proper TCP/IP Servers are Started on As2
The TFTP Server and the Network Station Login Daemon Server must both
be started on the As2 system for this scenario. This can be checked through a
green screen interface entering the command, NETSTAT *CNN. The resulting
display is shown in Figure 114 on page 205. Notice that the Network Station
Login Daemon uses port 256.
The status of these servers can also be checked using Operations Navigator.
The resulting display is shown in Figure 115 on page 205.