System information

192
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 100. Twinax Attached Network Station Obtaining Network Configuration
5.9.1 Scenario Overview
This scenario shows an example of a twinaxial Network Station attached to a
local workstation controller on an AS/400 system. This AS/400 system is a
DHCP server and provides the network configuration to the Network Station.
It also provides the address of the base code server and the terminal
configuration server to the Network Station. In this scenario, the As2 system
is the system that the As1 system directs the Network Station to for its base
code and terminal configuration server.
The As2 system is set up with the TFTP server running and the Network
Station Login Daemon server.
5.9.2 Scenario Objectives
The objectives of this scenario are to:
• Configure twinax-attached IBM Network Stations.
• Configure the DHCP server, As1, to provide the locally attached twinax
IBM Network Stations with network configuration.
• Configure the DHCP server, As1, to provide information to the attached
twinax IBM Network Stations on where to -obtain kernel and configuration
data.
• Start the Network Station and ensure LAN connectivity.
.2
10.1.1.0
255.255.255.0
AS1
TFTP
Server
As2
WSC
DHCP
Server
As1
.50
3) 10.1.1.50, Boot me
up
1) My network
Configuration?
2)Go to 10.1.1.50 for your
kernel and configuration
data