System information

188
AS/400 IBM Network Station: Techniques for Deployment in a WAN
not configured as discussed in Section 5.7.8, “Configuring the DHCP Server
As1 for Twinax Support” on page 157.
To configure the twinax subnet pool, complete the following steps:
1. Open the DHCP configuration, from Operations Navigator, on As2.
2. Right click
Global
and select
New Subnet - Advanced
.
3. Click
General
and enter the values as shown in Figure 97 on page 188.
Figure 97. DHCP Configuration - New Subnet Group
Note
: Ensure that the
Twinax subnet
box is left
unchecked .
4. Click the
Address Pool
tab.
5. Click
Subnet Address
and specify the twinax subnet address as
10.1.1.192
.
6. Enter the mask
255.255.255.192
into the
Subnet mask field.
7. Click
Range to assign
. The addresses are automatically filled in. See
Figure 98 on page 189 for the resulting display.