System information

184
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 92. DHCP Configuration
The next step is to group the two address ranges together again to form one
pool in the DHCP server configuration.
To form a subnet group within the DHCP configuration, perform the following
steps:
1. From the Operations Navigator DHCP, right-click
Global
.
2. Click
New Subnet Group
as shown in Figure 93 on page 185.
For both of these groups, select the
Options
tab and configure DHCP
option
1
to pass the real mask to use on this network, which is
255.255.255.0. You also must configure any other relevant options that
clients on the main network require.
Attention