System information

182
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 90. AS/400 Operations Navigator - Creating New Subnet in DHCP
5. Click on the
Address Pool
tab and fill in the Subnet address and the
Subnet mask as shown in Figure 91 on page 183.
6. When you click on
Range to Assign
, the values are filled in automatically.
Ensure that addresses 10.1.1.2 and 10.1.1.50 are excluded from the pool
because these are the LAN IP interfaces for the AS/400 systems in this
scenario.
The resulting Operations Navigator display for the first group is shown in
Figure 91 on page 183.