System information

175
Figure 82. AS/400 Operations Navigator - TCP/IP Server Status
5.8.4 Power on the IBM Network Station
Start the twinax IBM Network Station to allow the AS/400 system to build the
necessary TCP/IP interface and line description for the workstation controller.
Power on the twinax attached IBM Network Station and look for the following
messages:
•
NS0500 Search for Host System
• NS0930 Attempting to use DHCP
These messages indicate that the AS/400 system has completed building the
required TCP/IP interface for the workstation controller. Figure 83 on page
176 shows the resulting configuration display for the QTDL objects which
were automatically created by the system.