System information

152
AS/400 IBM Network Station: Techniques for Deployment in a WAN
The display device, DSP02, is also updated to include the assigned IP
address of 10.1.1.194. This is shown in Figure 61.
Figure 61. Updated 5150 Device Description
5. When the IBM Network Station was initially configured with the IBM
Network Station Setup Utility, a value of either
NVRAM or NETWORK
could be chosen (see Section 5.4.8, “Configuring and Starting the IBM
Network Station” on page 130). If
Network was chosen, then a BOOTP
table entry was created on the AS/400 system. To view this, run the Work
BOOTP Table (WRKBPTBL) command. The resulting AS/400 display is
shown in Figure 62.
Figure 62. BOOTP Table Entry for Twinax IBM Network Station
6. To see a more detailed view of this bootup entry, type a
5
beside the entry.
The full detail is then shown as in Figure 63 on page 153.
Display Device Description AS1
10/02/98 10:54:54
Device description . . . . . . . . : DSP02
Option . . . . . . . . . . . . . . : *BASIC
Category of device . . . . . . . . : *DSP
Device class . . . . . . . . . . . : *LCL
Device type . . . . . . . . . . . : 5150
Device model . . . . . . . . . . . : 3
Port number . . . . . . . . . . . : 1
Switch setting . . . . . . . . . . : 0
Internet address . . . . . . . : 10.1.1.194
Online at IPL . . . . . . . . . . : *YES
Attached controller . . . . . . . : CTL01
Keyboard language type . . . . . . : USB
Work with BOOTP Table
System: AS1
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display
Client
Host MAC IP
Opt Name Address Address
DSP02_AS1.MYCOMPANY.COM 00.00.a7.02.38.d1 10.1.1.194