System information

150
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 57. Adding IP Interface for QTDLC827500 Line Description
3. To start the interface that you have created, type CFGTCP on any command
line and press
Enter
. Select option
1
(Work with TCP/IP interfaces) as
shown in Figure 58. Enter an option
9
beside the 10.1.1.193 interface.
Figure 58. Starting the Interface for the QTDL827500 Line Description
4. Ensure that the status of the interface is Active . Press
F11
to see the
status of the interfaces as shown in Figure 59 on page 151.
Add TCP/IP Interface (ADDTCPIFC)
Type choices, press Enter.
Internet address . . . . . . 10.1.1.193
Line description . . . . . . QTDL827500 Name, *LOOPBACK, *VIRTUALIP
Subnet mask . . . . . . . . 255.255.255.192
Associated local interface 10.1.1.2
Type of service . . . . . . . . *NORMAL *MINDELAY, *MAXTHRPUT...
Maximum transmission unit . . . *LIND 576-16388, *LIND
Autostart . . . . . . . . . . . *YES *YES, *NO
PVC logical channel identifier 001-FFF
+ for more values
Work with TCP/IP Interfaces
System: AS1
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display 9=Start 10=End
Internet Subnet Line Line
Opt Address Mask Description Type
10.1.1.2 255.255.255.0 TRLAN2 *TRLAN
9 10.1.1.193 255.255.255.192 QTDL827500 *TDLC
127.0.0.1 255.0.0.0 *LOOPBACK *NONE