System information

138
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 45. Updated 5150 Device Description
5. When the IBM Network Station was initially configured with the IBM
Network Station Setup Utility, a value of either
NVRAM or Network could
be chosen (see Section 5.4.8, “Configuring and Starting the IBM Network
Station” on page 130). If
Network was chosen, then a BOOTP table entry
was created on the AS/400 system. To view this, run the Work BOOTP
Table (
WRKBPTBL.) command. The resulting AS/400 display is shown in
Figure 46.
Figure 46. BOOTP Table Entry for Twinax IBM Network Station
To see a more detailed view of this bootup entry, type a
5
beside the entry.
The full detail is then shown as in Figure 47 on page 139.
Display Device Description Page 1
5769SS1 V4R3M0 980729 AS1 08/31/98 13:30:24
Device description . . . . . . . . : DEVD DSP02
Option . . . . . . . . . . . . . . : OPTION *ALL
Category of device . . . . . . . . : *DSP
Device class . . . . . . . . . . . : DEVCLS *LCL
Device type . . . . . . . . . . . : TYPE 5150
Device model . . . . . . . . . . . : MODEL 3
Port number . . . . . . . . . . . : PORT 1
Switch setting . . . . . . . . . . : SWTSET 0
Internet address. . . . . . . : 10.10.10.2
Online at IPL . . . . . . . . . . : ONLINE *YES
Attached controller . . . . . . . : CTL CTL01
Keyboard language type . . . . . . : KBDTYPE USB
Print device . . . . . . . . . . . : PRTDEV *SYSVAL
Output queue . . . . . . . . . . . : OUTQ *DEV
Printer file . . . . . . . . . . . : PRTFILE QSYSPRT
Library . . . . . . . . . . . . : *LIBL
Workstation customizing object . . : WSCST *NONE
Work with BOOTP Table
System: AS1
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display
Client
Host MAC IP
Opt Name Address Address
DSP02_AS1.MYCOMPANY.COM 00.00.a7.02.38.d1 10.1.1.194