System information

Twinax Attachment of Network Stations
137
• The TCP/IP address (in this scenario 10.10.10.2) assigned to the
Network Station.
• The IP address (in this scenario 10.10.10.1) for the Twinax interface.
• The Configuration Directory (in this scenario
/QIBM/ProdData/NetworkStation/configs/ )
The IBM Network Station updates its own NVRAM settings with the Boot
Host IP Address and Configuration Directory.
On the AS/400 system, the QTDLC line, controller and device are
ACTIVE .
The configuration display is shown in Figure 44.
Figure 44. Configuration Status of QTDL824300 Line, Controller, and Device
The device description, DSP02, has also been updated to include the
assigned IP address. A detailed description of this device is shown in Figure
45 on page 138.
Work with Configuration Status AS1
08/31/98 13:30:05
Position to . . . . . Starting characters
Type options, press Enter.
1=Vary on 2=Vary off 5=Work with job 8=Work with description
9=Display mode status 13=Work with APPN status...
Opt Description Status -------------Job--------------
QTDL824300 ACTIVE
QTDL8NET ACTIVE
QTDL8TCP ACTIVE QTCPIP QTCP 004427
Bottom
Parameters or command
===>
F3=Exit F4=Prompt F12=Cancel F23=More options F24=More keys