System information

136
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 42. Adding IP Interface for QTDLC824300 Line Description
3. Start the interface that you have created. Type the command CFGTCP and
then choose option
1
(Work with TCP/IP interfaces) as shown in Figure 43.
Figure 43. Starting the Interface for the QTDLC824300 Line Description
4. Enter a
9
to start the 10.10.10.1 interface as shown in Figure 44 on page
137. Ensure that the status is
Active by pressing
F11
.
If you return to the Network Station, the boot process should be
continuing. The TDLC component, on the AS/400 system, sends an
initiation link to the IBM Network Station. This initiation link contains:
Add TCP/IP Interface (ADDTCPIFC)
Type choices, press Enter.
Internet address . . . . . . . . 10.10.10.1
Line description . . . . . . . . QTDL824300 Name, *LOOPBACK, *VIRTUALIP
Subnet mask . . . . . . . . . . 255.255.255.0
Associated local interface . . . *NONE
Type of service . . . . . . . . *NORMAL *MINDELAY, *MAXTHRPUT...
Maximum transmission unit . . . *LIND 576-16388, *LIND
Autostart . . . . . . . . . . . *YES *YES, *NO
PVC logical channel identifier 001-FFF
+ for more values
X.25 idle circuit timeout . . . 60 1-600
X.25 maximum virtual circuits . 64 0-64
X.25 DDN interface . . . . . . . *NO *YES, *NO
TRLAN bit sequencing . . . . . . *MSB *MSB, *LSB
Bottom
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
Work with TCP/IP Interfaces
System: AS1
Type options, press Enter.
1=Add 2=Change 4=Remove 5=Display 9=Start 10=End
Internet Subnet Line Line
Opt Address Mask Description Type
9.5.69.219 255.255.255.192 TRNLINE *TRLAN
9 10.10.10.1 255.255.255.0 QTDL824300 *TDLC
127.0.0.1 255.0.0.0 *LOOPBACK *NONE