System information

134
AS/400 IBM Network Station: Techniques for Deployment in a WAN
Figure 39. Configuration Status Display of Automatically Created QTDL Descriptors
Figure 40 shows the detail of the twinaxial data link control line description.
Figure 40. QTDL824300 Line Description
The system also creates a display device; in this case it is DSP02.
This device is created underneath the workstation controller (CTL01 in this
case) and its description is shown in Figure 41 on page 135.
Work with Configuration Status AS1
08/31/98 13:28:21
Position to . . . . . Starting characters
Type options, press Enter.
1=Vary on 2=Vary off 5=Work with job 8=Work with description
9=Display mode status 13=Work with APPN status...
Opt Description Status -------------Job--------------
QTDL824300 ACTIVE
QTDL8NET VARIED ON
QTDL8TCP VARIED OFF
Display Line Description AS1
08/31/98 13:28:52
Line description . . . . . . . . . : QTDL824300
Option . . . . . . . . . . . . . . : *BASIC
Category of line . . . . . . . . . : *TDLC
Attached work station ctl . . . . : CTL01
Network controller . . . . . . . . : QTDL8NET
Online at IPL . . . . . . . . . . : *NO
Text . . . . . . . . . . . . . . . : CREATED BY AUTO-CONFIGURATION