System information

Twinax Attachment of Network Stations
133
The QHST log on the AS/400 system has additional messages logged, as
shown in Figure 38.
Figure 38. Display of QHST Log on the AS/400 System
The system automatically creates a QTDLC line, controller and device. Figure
39 on page 134 shows the configuration status display of these auto-created
descriptors.
If the message NS0500 is logged on the Network Station and there are no
messages logged in QSYSOPR message queue, check the System Value
QAUTOCFG using the AS/400 command
DSPSYSVAL QAUTOCFG. If this value is
set to OFF, change it to ON to connect and configure twinax IBM Network
Stations to your AS/400 system.
Note
5769SS1 V4R3M0 980729 History Log
MSGID SEV MSG TYPE
CPC2622 00 COMPLETION Description for device DSP02 created.
QSYSARB QSYS 004352 08/31/98 13:21:00
CPC2605 00 COMPLETION Vary on completed for device DSP02.
QSYSARB QSYS 004352 08/31/98 13:21:00
CPC2630 00 COMPLETION Automatic configuration created device description DSP02.
QSYSARB QSYS 004352 08/31/98 13:21:00
CPC2601 00 COMPLETION Line description QTDL824300 created.
QLUS QSYS 004357 08/31/98 13:21:00
CPC2623 00 COMPLETION Description for controller QTDL8NET created.
QLUS QSYS 004357 08/31/98 13:21:00
CPC2622 00 COMPLETION Description for device QTDL8TCP created.
QLUS QSYS 004357 08/31/98 13:21:00
CPC2607 00 COMPLETION Vary on completed for line QTDL824300.
QLUS QSYS 004357 08/31/98 13:21:00
CPC2609 00 COMPLETION Vary on completed for controller QTDL8NET.
QLUS QSYS 004357 08/31/98 13:21:00
CPF5909 00 INFO Line QTDL824300 varied on successfully.
QSYSARB QSYS 004352 08/31/98 13:21:00
CPIB461 60 INFO DSP02 cannot connect. TCP/IP interface not added for line
QTDL824300.
QSYSCOMM1 QSYS 004377 08/31/9813:21:00
CPF5908 00 INFO Controller QTDL8NET contacted on line QTDL824300.
QSYSARB QSYS 004352 08/31/98 13:21:01