System information

88
AS/400 IBM Network Station: Techniques for Deployment in a WAN
• mwm.nws
• nfsd.nws
• ns3270.nws
• ns5250.nws
• ns5250xx.nws
• sbcs_im.nws
• seriald.nws
• setup.nws
• term.nws
• nsterm.nws
12.Type
verify
to check the local Flash card file system once the copy
operation is complete.
13.Type
df
to display the file system size in bytes.
14.Type
exit
to end the local file manager program.
15.Click on
logout
to end the session.
16.Proceed to Section 3.3.10, “Booting the IBM Network Station Using the
Flash Card” on page 89.
Table 17. Network Station Local File Manager Commands
Command Description
cd
directory Changes the current working directory to
directory.
compare
file1 file2 or
cmp
file1
file2
Compare the contents of the two files and
displays a message stating whether the files
are equivalent.
copy
sourcefile destfile or
cp
sourcefile destfile
Copies the specified file ( sourcefile ) to the
specified destination (
destfile ). Copying files
may take a long time and affect the kernel's
response time while it is taking place.
Please see the note at the end of this table.
cwd
or
pwd
Displays the current working directory.
delete
file(s) or
del
file(s) or
remove
file(s) or
rm
file(s)
Delete the specified
files from the local file
system. On a PCMCIA card, after using the
delete
command, use the
reclaim
command
to re-pack previously used file space for
subsequent use.
format
[/local] Formats the local file system /local .
Warning:
Formatting the file system destroys
any data that is already on it.