System information

Using Flash Cards with the Network Station
87
6. Copy the kernel to the Flash card file system by entering the following
command in the local file manager:
cp kernel.Z /local/
This copy operation should take approximately four minutes to complete.
7. Edit the
boot.nsl file in /QIBM/ProdData/NetworkStation/nsflash before
copying it to the Flash card.
a. Open the file
boot.nsl from the directory
/QIBM/ProdData/NetworkStation/nsflash with a PC editor.
b. Change the line to read:
Login.bootConfigType: MOUNT_LOCAL
c. Close and save the file to the same directory,
/QIBM/ProdData/NetworkStation/nsflash .
8. Copy the
boot.nsl
file to the Flash card file system by entering the
following command in the local file manager:
cp boot.nsl /local/
9. Change to the /QIBM/ProdData/NetworkStation/nsflash/mods directory by
entering the command
cd mods or specify the full path name of
/QIBM/ProdData/NetworkStation/nsflash/mods .
10.Verify your current working directory using the
pwd command.
11.Type
dir and press
Enter
. This shows a list of all executable modules that
were copied earlier in Section 3.3.2, “Creating a Flash Card Boot Image”
on page 73.
You must copy each file individually, one at a time, from the AS/400 IFS to
the
/local/mods directory on the local Flash card file system using the
following command:
cp filename /local/mods/
The filename is each of the following names:
• actlogin.nws
• colormap.nws
• export.nws
• filed.nws
• libconf.nws
• libmlc.nws
• libprapi.nws
• libprxapi.nws
• mcuis.nws
• miscpr32.nws