User`s manual

Step

Installing and use the Power

Packet Utility

You can use Powerline Power Packet utility to check the quality of your connection

and scan PLC devices in your local network; you can change the adapter’s default

password and establish a private security network with other PLC devices, also you

can upgrade the firmware by using this utility. Now please follow the steps below for

installation:

1. After start your PC please insert the CD-ROM into your CD drive.

2. The installation program will be launched automatically, if does not please run the

“autorun.exe” which can be found in the CD-ROM’s root directory.

3. Click the “ Power Packet utility” on setup screen then start the installation.

4. Select the installation folder the click “Next” and simply follow the Wizard’s

instruction to complete the installation.

5. You can execute this program from this location:

“Start””Program files””Simpler-Networks Powerline””Power Packet utility”.

Powerline application

2F Reading room

1F living room

ADSL / Cable

Internet

Powerline

Ethernet

HP200SA64

Forming a HomePlug AV Logical Network:

The Network Membership Key (NMK) button uniquely identifies a Private Network,

the HomePlug AV Logical Network (AVLN). Devices that share the same NMK will

form a logical network when connected to common powerline media. This permits

multiple logical networks to exist on the same connection. Individual devices can join

or leave a specific logical network by changing NMK. In order to form a secure

HomePlug AV Logical Network between two adapters are as following 3 steps:

1. Press the button on the first device for less than 3 seconds.

2. Press the button on the second device for less than 3 seconds.

3. Wait for connection to complete within 1 minute.

Please refer to user’s manual for further information.