User manual

200M PLC User Manual 6 How to Use the NMK Pushbutton
25
(2) Wait for reset to complete.
The Power LED on the ‘leaver’ momentarily extinguishes during
reset, flashes during restart, and then illuminates steadily. No errors
occur.
Once the process completes, you may disconnect the device from
the medium or join it to another logical network on the same
medium.
A
PLC
B
PLC
C
PLC
A, B and C form an AVLN
A wants to leave the AVLN
Press NMK button on A more than 10 sec.
A computes random NMK
C resets and restarts
A
PLC
A
PLC
B
PLC
B
PLC
C
PLC
A, B and C form an AVLN
A wants to leave the AVLN
Press NMK button on A more than 10 sec.
A computes random NMK
C resets and restarts
Figure 14 Leaving a network