User manual

200M PLC User Manual 6 How to Use the NMK Pushbutton
22
6 How to Use the NMK Pushbutton
This section describes how to add new devices to and remove old
devices from, a HomePlug AV logical network (AVLN). Both
operations can be accomplished by using an NMK pushbutton
press.
You can monitor operation progress and outcome by observing the
status of the Power LEDs.
6.1 Forming A HomePlug AV Logical
Network
When two devices with different NMK values are connected to the
same powerline, and you want them to form a logical network, do
as follows:
(1) Press the NMK button on the first device A for less than
3 seconds.
(2) Press the NMK button on the second device B for less
than 3 seconds. The button on B must be pressed within
1 minute
(3) Wait for connection to complete.
The Power LED on each device flashes evenly at 1-second
intervals until the operation succeeds or fails. It illuminates steadily