User manual

200M PLC User Manual 5 How to Use the Utility Software

Set Local Device Only

This button can be used to change the network name (network

password) of the local device. If a new network password is entered,

all devices shown in the Main panel prior to this no longer appear

in the new network, effectively making the local devices not to

communicate to the devices that were in the old logical network.

Devices previously set up with the same logical network (same

network name) appear in the device list after you select this option.

Set All Devices

This button is used to change the logical network of all devices that

appear on the Main panel whose device passwords are entered for

the same logical network. A dialog box appears to report the

success of this operation. For devices whose device passwords are

not entered, this operation fails and a failure message is reported.

5.3 Diagnostics Tab

The Diagnostics tab shows System information and a history of all

remote devices over a period of time. The appearance is shown in

Figure 10.

The upper panel shows technical data concerning software and

hardware present on the host computer that are used to

communicate over HomePlug on the Powerline network. It should

include the following:

Operating System Platform/Version