User manual

200M PLC User Manual 5 How to Use the Utility Software
12
5 How to Use the Utility Software
5.1 Main Tab
The Main tab provides a list of all powerline devices logically
connected to the computer when the utility is running.
The top panel shows local HomePlug devices connected to the
network interface card (NIC) of the computer. Click Connect to its
right. Once connected to the local device, the utility automatically
scans the power line periodically for any other HomePlug device. If
no local HomePlug device is discovered, the status area above the
Connect button indicates with a message NO HOMEPLUG
ADAPTERS DETECTED.