User manual

GP-L200MP User Manual
25
Figure 13 Joining a Network
6.3 Leaving a Network
Suppose that a network exists. You want to remove one device, the ‘leaver’, from that
network, for whatever reason, and you may want to remove the device from service
altogether or have it join another logical network. Do as follows:
Step1 Press the pushbutton on the ‘leaver’ for at least 10 seconds. The device will
reset and restart with a random NMK.
Step2 Wait for reset to complete.
The power LED on the ‘leaver’ will momentarily extinguish during reset, flash during
restart then illuminate steadily. No errors can occur.
Once the process completes, you may disconnect the device from the medium or join
it to another logical network on the same medium.