User manual

20
5.4 Further Information
This screen provides more detailed information concerning your network. It is
divided into various sections with each section divided by a “Return to main
page” link back to the WUI homepage. These sections are shown below and
each section is followed by a table that explains it.
SYSTEM INFORMATION
Field
Description
Uptime
This shows the length of time the PowerGrid unit has been on.
Firmware Version
This shows the PowerGrid installed firmware version.
MAC STATUS
This section provides information for identification of the PowerGrid 9020 by MAC
Address, in addition to PowerGrid network encryption details.
Field
Description
MAC Address
This is a code that identifies each PowerGrid unit. It can be
found on the back label of the unit below the barcode.
MAC Type
In-Home AV is the only option at this time.
Node Type
This will show as Fixed AP, EP or AP.
Network
Identifier
This field is used to identify the network.
It can be up to 20 ASCII characters long.
Encryption Key
This key is used to encrypt the network.
It is encoded in either ASCII or HEX format.
Encryption Type
The possibilities are 168 bit 3DES or 128/256 bit AES.