SDS

Specifications and data are subject to change without notice. Contact Tenergy for latest information.
©2010 Tenergy Corporation. All rights reserved. Page 5 of 8
Tenergy Corporation
436 Kato Terrace
Fremont, CA 94539
Tel: [phone] Fax: [phone]
www.TenergyBattery.com email: [e-mail]
8. HANDLING AND STORAGE
Handling: Specific safe handling advice: Never throw our cells in a fire or expose to high temperatures. Do not
soak cells in water and seawater. Do not expose to strong oxidizers. Do not give a strong mechanical shock or
throw down. Never disassemble, modify or deform. Do not connect the positive terminal to the negative
terminal with electrically conductive material.
Storage conditions (suitable, to be avoided): Do not place the battery cell near heating equipment, nor expose
to direct sunlight for long periods. Elevated temperatures can result in shortened battery cell life and degrade
performance.
Store in cool place: temperature: -20-45C, humidity: 45-75%
Incompatible products: Conductive materials, water, seawater, strong oxidizers and strong acids.
Packing material(recommend, not suitable): Insulative and tearproof materials are.
9. EXPOSURE CONTROLS/ PERSONAL PROTECTION
Engineering controls: Investigate techniques to reduce exposures use with adequate ventilation and
recommended personal protective equipments.
Eye protection: Minimize skin contamination by following good industrial hygiene pratices. Wearing
protective gloves is recommended. Wash hands and contaminated skin thoroughly after handling.
Respiratory protection: Avoid breathing dust and processing vapors. When adequate ventilation is not
available, wear a NIOSH/MSHA respirator approved for protection against inorganic dusts.
Special clothing: Robber gloves,
10. HYSICA DATE
Physical state: Solid
Form: Geometric solid
Color: Metallic color (without outer PVC cover)
PH: Not applicable
Flash point: Not applicable
Explosion properties: Not applicable
Density: Not applicable
Solubility: Not soluble