User manual

SimpleComTools, LLC PRC1000 – User Manual
SimpleComTools, LLC 11
Configuration Utility Register Descriptions
Parameter Name
Description
General Settings
Time
Sets the clock time for the device. Format is HH:MM.
Date
Sets the calendar date for the device. Format is DOW/MM/DD/YYYY.
Sleep Mode Timer
Sets the number of minutes before going into Sleep mode.
Relay Settings
Relay „x‟ – Status
Displays the current state of RELAY 1. (Value = ON or OFF)
Relay „x‟ – Schedule On Time
The time of day that RELAY „x‟ will be activated.
Relay „x‟ – On Duration
The length of time that RELAY „x‟ will remain activated.
Relay „x‟ – Repeat Schedule
The length of time between RELAY „x‟ activation events within a 24 hour period.
Relay „x‟ – Pattern
Type of recurrence pattern for the start and duration of RELAY „x‟.
Options are as follows:
(Daily) - Enter D
(Weekly) - Enter W,ddd
(Monthly) - Enter M,xxx
ddd = A comma separated list of days of the week
Valid values are SUN, MON, TUE, WED, THU, FRI, SAT
Example: D,MON,WED,FRI
xxx = A comma separated list of days of the month. Valid values are 1-31
Example: M,1,5,10,15
Relay „x‟ – Forced On Duration
The length of time that RELAY „x‟ will remain active when forced on by command.
Relay „x‟ – Forced On „Alias‟
The „plain English‟ command to be used to activate RELAY „x‟.
Accepts any alpha-numeric value up to 20 characters.
Relay „x‟ – Forced Off „Alias‟
The „plain English‟ command to be used to de-activate RELAY „x‟.
Accepts any alpha-numeric value up to 20 characters.