Technical data

SimpleComTools, LLC COM1000 – AT Commands
SimpleComTools, LLC 8
* I1TCPDESTIP
IP or Domain of TCP Packet Destination x.x.x.x or abc.123.com (Up to 50
characters)
* I1TCPDESTPORT
TCP Packet Destination Port = nnnnn
(5 digit value with range between 1 and 65535)
* I1UDPDESTIP
IP or Domain of UDP Packet Destination x.x.x.x or abc.123.com (Up to 50
characters)
* I1UDPDESTPORT
UDP Packet Destination Port = nnnnnn
(5 digit value with range between 1 and 65535)
*485APP1 RS485 Application #1;
*485APP2 RS485 Application #2;
*485APP3 RS485 Application #3;
*485BAUD
Sets RS485 Port Baud Rate Syntax = <baud rate> Example: 19200DEFAULT =
9600
*485BUFFER
RS485 Port Application Buffer Size: (n = 0 - 256 KBytes). Amount of data to be
stored before executing any of the *485APP selections. This value requires that
one of the RS485 PORT APP triggers be set to 4 (Buffer).Note: The buffer size
is shared between the TERMINAL and RS485 PORTS for a total of 256 KBytes.
The amount available to one port will depend on the usage of the other.
*485E Echo typed characters back locally
*485ESC Sets Terminal Escape String: Alphanumeric value up to 20 characters
*485EVENTMSG
Customizable RS485 event message text. (Up to 20 characters) A free-text field
used when applications are set to 3 or 4 (SMTP or SMS). This text will be seen
as the message SUBJECT field.
*485H Sets Terminal Hangup String: Alphanumeric value up to 20 characters
*485ICT
RS485 Inter-Character Timer. (n = 100 - 65535 milliseconds)The length of time
between characters that is necessary to consider the data stream ended. This
value requires that one of the RS485 PORT APP triggers be set to 2 (Inter-
character Timer.).
*485Q Quiet Mode: