Technical data

SimpleComTools, LLC COM1000 – AT Commands
SimpleComTools, LLC 24
Other ‘Non-AT’ Device Commands
Command Description
IPCONFIG
Plain-text command useable from a TCP, UDP or Terminal interface.
Returns the Current Ethernet IP Address and PPP Link Status
PING
Plain-text command useable from a TCP, UDP, Terminal, or Instant Message
interface. Will force the COM1000 to send an ICMP PING to any IP reachable
via the default interface (*DEFINT). Example: PING 203.123.123.121
RCONNECT
Plain-text command useable from a TCP, UDP or Instant Message interface.
Will create an end-to-end socket between the user’s application interface and
any device installed on the COM1000 RS485 port.
STATUS
Plain-text command useable from a TCP, UDP, Terminal or Instant Message
interface. Returns the values chosen using the AT*STATUS command.
TCONNECT
Plain-text command useable from a TCP, UDP or Instant Message interface.
Will create an end-to-end socket between the user’s application interface and
any device installed on the COM1000 RS232 Terminal port