Technical data

SimpleComTools, LLC COM1000 – AT Commands
SimpleComTools, LLC 20
AT*SCHFTPTYPE
SCHEDULED FTP TYPE
Data format to be uploaded by FTP client. Data will be sent in TXT file format.
Options: 0 = None (DEFAULT)
1 = Status (The STATUS events specified in the General Tab)
2 = Log (The device EVENT LOG will be uploaded)
*SCHMSGTIME
SCHEDULED MESSAGE TIMER.
Sets the time interval for scheduled sending of data files via SMTP or SMS.
Value is in minutes.
Options: 0 = not active (DEFAULT)
1-65535 = number of minutes (65535 min = ~45 days)
*SCHMSGRECIPIENT
SCHEDULED MESSAGE RECIPIENTS
Scheduled message recipient(s) for SMTP or SMS messages.
Recipient details are specified in the MESSAGING tab.
Max number of recipients = 8.
(Comma separation for multiple recipients - ie; 1,2,3,4,5,6,7,8)
*SCHEDTIMER
Sets the time interval for recurring logging to take place within the same 24-hour period.
Options: 0 = no logging (DEFAULT)
1-1440 = number of minutes between log entries
*SCHEDTOD
Sets the TIME OF DAY for regularly scheduled logging. Set the time value using the
format HH:MM. Must enter value in Military time. Example = 16:00 (aka: 4PM).
Options: 00:00 = Midnight (DEFAULT)
Note: Requires that the value DAY OF WEEK or DAY OF MONTH be set as well.
*SCHEDTYPE
Sets the TYPE of log entries being created.
Options: 0 = COUNT INPUT EVENTS (DEFAULT)
1 = LOG INPUT EVENT DETAILS
*SENDTO1 50 character alphanumeric value; can be phone number or email address
*SENDTO2 50 character alphanumeric value; can be phone number or email address
*SENDTO3 50 character alphanumeric value; can be phone number or email address
*SENDTO4 50 character alphanumeric value; can be phone number or email address
*SENDTO5 50 character alphanumeric value; can be phone number or email address
*SENDTO6 50 character alphanumeric value; can be phone number or email address
*SENDTO7 50 character alphanumeric value; can be phone number or email address