Technical data

SimpleComTools, LLC COM1000 – AT Commands
SimpleComTools, LLC 19
*RSCHTOD
Sets the TIME OF DAY for regularly scheduled relay triggering. Set the time
value using the format HH:MM. Must enter value in Military time. Example =
16:00 (aka: 4PM). Options: 00:00 = Midnight (DEFAULT)
Note: Requires the value DAY OF WEEK or DAY OF MONTH be set as well.
*RTC Forces real-time clock update from SNTP server specified in the *RTCIP.
*RTCTIME
Real-time Clock Timer. Update interval for timed updates from SNTP server
specified in the *RTCIP.
*RTCIP
IP or Domain of Simple Network Time Protocol (SNTP) server.
x.x.x.x or abc.123.com (Up to 50 characters)
*RTCZONE
Real Time Clock Zone. Time zone where the device will be located. Enter
integer value between -12 and +13 to indicate the offset from Greenwich Mean
Time (GMT). Values are as follows:
-12:00 = GMT-12 – Eniwetok
-11:00 = GMT-11 – Samoa
-10:00 = GMT-10 – Hawaii
-09:00 = GMT- 9 – Alaska
-08:00 = GMT- 8 – US Pacific Time
-07:00 = GMT- 7 – US Mountain Time
-06:00 = GMT- 6 – US Central Time
-05:00 = GMT- 5 – US Eastern Time
-04:00 = GMT- 4 – Atlantic Time
-03:00 = GMT- 3 – Greenland
-02:00 = GMT- 2 – Mid-Atlantic
-01:00 = GMT- 1 – Azores
00:00 = GMT- 0 – Greenwich Mean Time
+01:00 = GMT+ 1 – Berlin, Rome, Paris
+02:00 = GMT+ 2 – Jerusalem, Helsinki
+03:00 = GMT+ 3 – Moscow, Nairobi
+04:00 = GMT+ 4 – Abu Dhabi
+05:00 = GMT+ 5 – Karachi
+06:00 = GMT+ 6 – Astana
+07:00 = GMT+ 7 – Bangkok
+08:00 = GMT+ 8 – Hong Kong, Singapore
+09:00 = GMT+ 9 – Tokyo
+10:00 = GMT+10 – Guam
+11:00 = GMT+11 – New Caledonia
+12:00 = GMT+12 – Fiji
+13:00 = GMT+13 – Nuku’alofa
*SCHEDDOM
Sets the DAY OF MONTH for regularly scheduled EVENT logging. Set this value if you
do NOT want the log to be appended every day. Otherwise, the default value of 0 will
ensure that event data is added to the log daily.
Options: 0 = Every Day (DEFAULT)
1-31 = Day of the Month. (1=1
st
day, 2=2
nd
day, etc)
Note: Triggering once-per-month requires that DAY OF WEEK be set to ‘0’.
*SCHEDDOW
Sets the DAY OF WEEK for regularly scheduled EVENT logging. Set this value if you
want the log to be appended every day. Otherwise, the default value of 0 will ensure that
event data is added to the log daily.
Options: 0 = Every Day (DEFAULT)
1-7 = Day of the Week starting with Sunday. (Sun=1, Mon=2, Tue=3, etc)
Note: Requires that the value DAY OF WEEK or DAY OF MONTH be set as well.
AT*SCHFTPTIME
SCHEDULED FTP TIMER
Time interval for scheduled FTP upload of data files. Time value is in minutes.
Options: 0 = not active (DEFAULT)
1-65535 = number of minutes (65535 min = ~45 days)