Technical data

SimpleComTools, LLC COM1000 – AT Commands
SimpleComTools, LLC 16
*IMSERVERIP
IP or Domain of Instant Message Server. x.x.x.x or abc.123.com (Up to 50
characters)
*IMSERVERPORT
Instant message Server Port = nnnnnn
(5 digit value with range between 1 and 65535)
*IMUSER IM Account Username;
*INACTMSGFREQ
Repeat Inactive Event Message Transmission Frequency; Frequency of
Repeating Inactive Event Messages. This value controls the behavior when a
Digital Input state or Analog Input value has not changed, and a repeat message
is about to be sent. Default is every 30 Minutes
*M\Q Flow Control:
*MC DCD Control:
*MD DTR Control:
*MDIAL Sets Modem Dial String: Alphanumeric value up to 20 characters
*ME Echo typed characters back locally
*MESC Sets Modem Escape String: Alphanumeric value up to 20 characters
*MH Sets Modem Hangup String: Alphanumeric value up to 20 characters
*MINIT Sets Modem Initialization String: Alphanumeric value up to 20 characters
*MMODE Modem Mode of Operation
*MMODETIMER Modem Connection Timer
*MPORT
Sets Modem Port Baud Rate, Data Bits, Parity and Stop Bits. Syntax = <baud
rate>,<data bits><parity><stop bits> Example: 19200,8N1DEFAULT =
115200,8N1
*MSGMETHOD Outbound Message Notification Method;