Technical data

SimpleComTools, LLC COM1000 – AT Commands
SimpleComTools, LLC 13
*DDNSUSER Primary DDNS Account Username;
*DELIMITER Device stored data default output delimiter:
*DHCP
Dynamic Host Configuration Protocol (DHCP) is used for assigning dynamic IP
addresses to devices on a network. DHCP being on by default allows for the
COM1000 to be added to a network without manually assigning a unique IP
address. Leaving DHCP on means the unit will get a different IP address every
time it connects to the network.
*DNS1
x.x.x.x = IP of Primary Domain Name Server
0.0.0.0 = DNS Supplied by PPP or DHCP
*DNS2
x.x.x.x = IP of Secondary Domain Name Server
0.0.0.0 = DNS Supplied by PPP or DHCP
*DOMAIN
Device DOMAIN (domain.com): Names consists of a sequence of two or more
groups of characters separated by periods; and include the first-level domain
name (or top-level domain name), along with second or third level names.
Example: the host “computer.mydomain.com" would belong to the Domain
“mydomain.com”. Accepts alphanumeric values up to 50 characters. Acceptable
characters include A-Z, 0-9, and – or _. Characters ~ ! @ # $ % ^ & *,.; are
invalid.
*DST Daylight savings time enabled:
*FACTORY Resets all register values to factory default.
*FTPDIR Initial Remote Host Directory
*FTPFILENAME FTP Remote File Name Syntax;
*FTPIP x.x.x.x or abc.123.com = IP or Domain of FTP Server (Up to 50 characters)
*FTPMODE
By default, FTP data connections are established by the FTP server. Passive
Mode forces the data connections to be established by the client. Passive mode
may be required for users who are behind some types of router-based firewalls
or behind a gateway requiring passive transfers.
*FTPPASS Primary FTP Server Account Password;
*FTPPORT
FTP Server Port (Default is 21) = nnnnnn
(5 digit value with range between 1 and 65535)