Technical data

SimpleComTools, LLC COM1000 – AT Commands
SimpleComTools, LLC 11
*ALOWALARM Displays Low Alarm Count.
*ALOWALARMACT Sets the Low Alarm Action.
*ALOWALARMMSG
Customized Low Alarm Set Point Message. (Up to 20 characters) A free-text
field used in all UDP, TCP, SMS, and SMTP messages. For SMS and SMTP,
this will be seen as the SUBJECT field.
*ALOWALARMSET Low Alarm Set Point. The Set Point for exception reporting (n = 0.0-30.0)
*ALOWWARN Displays Low Warning Count.
*ALOWWARNACT Sets the Low Warning Action.
*ALOWWARNMSG
Customized Low Warning Set Point Message. (Up to 20 characters) A free-text
field used in all UDP, TCP, SMS, and SMTP messages. For SMS and SMTP,
this will be seen as the SUBJECT field.
*ALOWWARNSET Low Warning Set Point. The Set Point for exception reporting (n = 0.0-30.0)
*ANALOG Returns current reading of analog input
*ANALOGEXT Free text extension appended to the analog value output.
*ANAME
Customized ANALOG Interface Name. A free-text field for the NAME of the
interface which will be used in all UDP, TCP, and SMTP alerts. For SMTP alerts,
this will be seen as the FROM field. (Up to 20 characters)
*ARANGEMAX Highest range value of the chosen sensor.
*ARANGEMIN Lowest range value of the chosen sensor.
*ATCPDESTIP
IP or Domain of TCP Packet Destination. x.x.x.x or abc.123.com (Up to 50
characters)
*ATCPDESTPORT
TCP Packet Destination Port = nnnnnn
(5 digit value with range between 1 and 65535)
*AUDPDESTIP
IP or Domain of UDP Packet Destination. x.x.x.x or abc.123.com (Up to 50
characters)