Installation & Assembly

PEEL & STICK FABRIC WALLPAPER INSTALLATION
Step 3.
Begin applying the next piece by
butting the edges together and in
the order shown on the diagram to
the right. Trim any excess wallpaper
as needed once all pieces have
been applied.
©2016 Simple Shapes. All rights reserved.
If you are having any problems with the application procedure, please email us at [e-mail]. Thank you for your purchase.
Step 1.
Remove about 12 inches of the
backing from the first piece of
wallpaper. Apply from the top of
the wall or desired area first.
Step 2.
Using your hands, smooth the
section of wallpaper from top down
and from center outwards (see
diagram) Remove the remaining
backing as you go down. Use your
hands to remove any trapped air
bubbles before applying the
next piece.
Be sure to save the backing paper for later on, when you
want to remove the wallpaper. This will allow you to store
and reuse it at a later time!
Store and Reuse
®
* Our Peel and Stick Removable Wallpaper should be installed on finished surfaces ONLY. Walls must be primed or painted.
Unfinished surfaces such as bare drywall or concrete are not recommended.
* Wash & dry your hands completely before applying the wallpaper. (Hands must be completely dry)
* Do not use a squeegee or anything other than your hands to apply the wallpaper.