Instructions / Assembly

Table Of Contents

1.Parts list: A, B, C, D, E, F

4. Screw the C part onto the ceramic, insert it under

2. Screw mandrel B onto the threaded rod and set the

notch of the screw vertically upwards. The dimensions

may vary, according to the manufacturing tolerance of

the ceramics.

3.Lightly screw screw D into part C.

the nut seal E and tighten with the spanner F.

5. Slide the ceramic onto the mandrels B

Cleaning & Maintenance

1. Do not touch acid, ammonia, chlorine,

do not use abrasive cleaners.

2. Toilet bowl surfaces should only be cleaned

gently, with a cloth and a mild detergent

6.Tighten the screw with key A, use guide tubes for

easier assembly. Installation complete. Sit back for a

stability check.

solution.

ＷＡＬＬ　ＨＵＮＧ　ＴＯＩＬＥＴ

INSTALLATION INSTRUCTIONS

I f you encount er any i nst al l at i on i ssues, pl ease cont act us at ki l i t de980@out l ook. com

, and our t eam of exper t s wi l l be avai l abl e t o assi st you.

PAGE 1
ＷＡＬＬＨＵＮＧＴＯＩＬＥＴ INSTALLATION INSTRUCTIONS 1.Parts list: A, B, C, D, E, F 2. Screw mandrel B onto the threaded rod and set the notch of the screw vertically upwards. The dimensions may vary, according to the manufacturing tolerance of the ceramics. 3.Lightly screw screw D into part C. 4. Screw the C part onto the ceramic, insert it under the nut seal E and tighten with the spanner F. 5. Slide the ceramic onto the mandrels B 6.Tighten the screw with key A, use guide tubes for easier assembly.