Installation Guide

11
1. Warning
-The appliance is only ready for use after installation.
-The appliance must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30mA.
-If the supply cord is damaged, it must be replaced by the manufacture or its service agent or a
similarly qualified person in order to avoid a hazard.
-This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
- This appliance is of domestic use only
2. Operating principle
The pump has been designed to pump away the waste from toilet and other sanitary appliances.
The pump for toilets comprises an electric pump(D) that is automatically controlled by a float
switch(C).
The discharge action is triggered when the flushing system is actuated, as with a conventional
toilet. See picture.
3. Installation
3a Toilet CONNECTION