Instructions / Assembly

TWO-PIECE TOILET INSTALLATION INSTRUCTIONS
— 4 —
5
Install tank bolts in
bottom of tank as shown.
!
Tank to Bowl Gasket
Place the tank gasket over
the tank nut ensuring there
are no gaps between the
gasket and the chinaware.
6
Tighten handles alternately
until the tank contacts the front
and back of the bowl achieving
china-to-china contact.
NOTE:
To ease installation,
push down on the top of the
tank while tightening handles.
7
A
Connect water
supply line.
(Sold separately)
Hand tighten nut.
B
Turn on water supply.
!
WARNING: Overtightening of water supply
line nuts could result in breakage and
potential flooding. If the connection leaks
after hand tightening, replace the supply line.
Do not use any type of sealant on the water
supply connection. Use of plumber’s putty,
pipe dope, or any other type of sealant will
void the warranty.
8
SINGLE FLUSH
Adjust water level to level
indicated on tank by turning
water level adjustment knob
to move float cup up or down.