INSTALLATION INSTRUCTIONS Two-Piece Toilet with 12″ Rough-In
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: Inspect toilet to ensure no damages have occurred while in shipping. Please compare parts with package list. If anyone is damage or missing, please contact us. We will replace new one for you. Observe all plumbing and building codes in accordance with your state and local requirements. All dimensions are nominal! Be sure to measure your toilet prior to installa�on.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS PRODUCT SIZE: PARTS LIST: ·Bowl ·Tank ·Flush Lever ·Tank-To-Bowl ·Slow Close Seat Screws And Nuts （include screws and nuts） · Fill Valve (Pre-installation) ·Wax Ring —2— · Flush Valve (Pre-installation) ·Bolt Caps (2) ·Tank To Bowl Gasket ·Bowl-To-Floor Screws And Nuts
TWO-PIECE TOILET Before You Start: Turn Off Water Supply INSTALLATION INSTRUCTIONS If Removing An Existing Toilet Clean Flange Flush to remove water from tank; sponge remaining water from bowl before removing toilet. ! Caution: If leaving floor flange open for more than 1-2 hours, cover flange to prevent escaping sewer gases. BACK-TO-BACK INSTALLATION 1 Recommended fitting type for back-to-back installations.
TWO-PIECE TOILET 5 INSTALLATION INSTRUCTIONS 6 Install tank bolts in bottom of tank as shown. ! Tank to Bowl Gasket Place the tank gasket over the tank nut ensuring there are no gaps between the gasket and the chinaware. 7 Tighten handles alternately until the tank contacts the front and back of the bowl achieving china-to-china contact. NOTE: To ease installation, push down on the top of the tank while tightening handles. ! A Connect water supply line. (Sold separately) Hand tighten nut.
TWO-PIECE TOILET 9 INSTALLATION INSTRUCTIONS TOILET SEAT INSTALLATION UNSCEW THE NUTS. 11 10 INSERT SCREW INTO THE PLATE. 12 SLIDE THE PLATE WITH SCREW TO INSERT THE MOUNTING TRACK. SCREW TO THE HOLE OF SEAT ON THE BOWL. 13 ADJUST SEAT TO ALIGN TO THE BOWL. 14 TIGHTEN NUTS ALTERNATELY UNTIL THE TANK CONTACTS THE FRONT AND BACK OF THE BOWL ACHIEVING CHINA-TO-CHINA CONTACT.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS WARNING: The load capacity for magnet holder and hook is approximately 3 lbs. Please avoid hi�ng and scratching the protec�ve layer on the surface. If you require technical support or in the unlikely event that your purchase is faulty please EMAIL US for immediate assistance. Faulty product claims made within the 2 year warranty period will be replaced free of charge.
