Operation Manual

THE NEXT GENERATION CAR SEAT / DOONA BASE

08 / Installing

the Doona Infant Car

Seat with a Base.

•

The Doona Base must be secured in the vehicle before

installing the Doona Infant Car Seat in it.

•

Before you install the Doona Infant Car Seat in the

Doona Base, make sure it is in car seat mode and the

handle is in its upright position.

WARNING

IMPORTANT! For further information on the Doona Infant Car Seat use

modes, changing between use modes and adjusting the rotation angle

of the handle please refer to the Doona Infant Car Seat user guide.

Step 1: When the Doona Infant Car Seat is in car seat mode (wheels

are folded), and the handle is in its vertical position, place the Doona

Infant Car Seat facing the back of the vehicle (opposite the direction

of driving) (a).

Step 2: Align the Doona Infant Car Seat above the base anchor points

and slide it down until a click is heard and it is locked in place (b).

Step 3: Shake the handle to ensure that the Doona Infant Car Seat is

properly secured (c).