Operation Manual

Step 1: Place the Doona Base in the desired location on the vehicle seat.

Step 2: Lock BOTH belt lock-offs (#4) on both sides of the Doona Base

(a). The lock-offs are NOT in use when installing Doona Base with a lap

belt.

Step 3: Pull the vehicle’s lap belt. Ensure it is not twisted.

Step 4: Route the vehicle seat belt under and through the rst vehicle

belt guide (#3), and through the second vehicle belt guide (#3) (b).

Step 5: Engage the vehicle seat belt buckle tongue in the vehicle seat

buckle (c).

Step 6: Tighten the lap belt (d).

INSTALLING THE DOONA BASE