Operation Manual
19
Step 1: Release the LATCH connectors (#8) from their storage slots in
the Doona Base - press and hold the red LATCH connector release
buttons (#7) and pull the LATCH connectors out (a).
Step 2: Lengthen the LATCH adjuster strap (#5) - press and hold the
LATCH adjuster strap release button (#6), then pull the strap (b).
Step 3: Place the Doona Base in the desired location on the vehicle seat.
Insert the base’s LATCH connectors into the vehicle’s LATCH anchor
points, then press them until you hear a click sound (c).
Step 4: Tighten the LATCH adjuster strap (#5) - while pressing the Doona Base
down into the seat and pulling the LATCH adjuster straps up (d).
a.
c.
b.
d.
INSTALLING THE DOONA BASE