Operation Manual

THE NEXT GENERATION CAR SEAT / DOONA BASE
18
•
The Doona Base must be properly secured in the vehicle
before installing the Doona Infant Car Seat on it.
•
Before using the Doona Base in the vehicle, you must rst
adjust its level. The base’s level can be adjusted only as
described in this user guide.
•
Ensure that the Doona Base is not raised from the front
edge of the vehicle seat. In the event of an accident, it
might disrupt the correct functioning of the base.
•
The Doona Base can be installed in the vehicle either
with the LATCH system or with the vehicle’s belt. DO NOT
attempt to install the Doona Base using both the LATCH
system and the vehicle’s belt, as it is not approved, and
it might disrupt the correct functioning of the Doona
Infant Car Seat and the Doona Base.
•
The Doona Base can be installed with the LATCH system
only in vehicles equipped with LATCH anchor points.
•
Before attempting to install the
Doona Base in the vehicle using
the LATCH system, ensure that the
vehicle is equipped with LATCH
anchor points.
7.3. LATCH Installation
WARNING