Operation Manual

THE NEXT GENERATION CAR SEAT / DOONA BASE
16
07 / Installing the
Doona Base.
• Before you install the Doona Base,
park the car on a level surface.
• To adjust the level of the base, use the
recliner knob (#2).
• For leveling the Doona Base, turn
the recliner knob (#2) clockwise or
counterclockwise, as needed (a).
• The base is leveled when the white
markers on the recline level indicators
(#9) on both sides are completely
within the green area (b).
• If you cannot level the base properly,
please follow these steps:
– Try installing the Doona Base on a
different seat. OR
– Place a rolled soft object (e.g. towel or
pool noodle) in the vehicle seat bight
and place the base on the rolled soft
object to level the base (c).
IMPORTANT: If a rolled soft object is
required, ensure that the recliner knob
(#2) on the base remains on its lowest
position (turned all the way clockwise).
7.1. Recline Angle and Leveling
b.
a.
c.