Operation Manual

THE NEXT GENERATION CAR SEAT / ISOFIX BASE

5.2. Removing the Doona ISOFIX

Base from your vehicle

Step 1: Make sure the Doona Infant Car Seat is not connected

to the ISOFIX Base. In case it is connected, please remove it rst.

Detailed description for removing the Doona Infant Car Seat

from the ISOFIX Base can be found in chapter 6.2.

Step 2: Pull the ISOFIX release button (#6) on each side of the

Doona ISOFIX Base, and pull the ISOFIX Base body away from

the vehicle’s ISOFIX low anchors, until the Doona ISOFIX Base is

completely disconnected.

Step 3: Fold the support leg (#10).

Note: Do not leave the Doona ISOFIX Base unattached inside

the vehicle. Any luggage or other objects liable to cause

injuries in the event of a collision shall be properly secured.