Instructions / Assembly
Simple Green 32 oz. Foaming Coil Cleaner, Trigger Spray
Instrucons For Use:
1. Turn o or disconnect power to unit being cleaned and wait unl coils are cool before
cleaning.
2. Apply cleaner to soiled surfaces and let sit for 2-5 minutes. If heavy foaming is needed,
apply liquid by a pressurized or pump-up spray applicator. Avoid spraying onto electrical
wires or connecons.
3. This product is self-rinsing on condensate-producing coils, simply leave cleaner to dry.
Otherwise, damp wipe or rinse clean with water.
4. For extremely stubborn soils, repeat steps 2 and 3 as necessary.
5. Once rinsed or dried, restore power to unit.
*NON-CORROSIVE when used as directed on cool surfaces.