User guide
Powerline Adapter basics continued
Underside panel
Pairing button
Use this button to pair your Powerline
Adapter with your Roomplayer. Make
sure you follow the detailed pairing
instructions on page 8.
To set up your adapter for the rst
time, plug it in and switch it on, then
press and hold this button for 10
seconds (until all the lights on the front
panel ash twice). This will prepare
the Powerline Adapter for pairing. To
create or join an existing network,
press and hold this button for 2
seconds to enter ‘pairing’ mode.
Reset button
Use this button only if advised by
Simple Audio. Use a small object to
press and hold this button for 2-3
seconds. Release the button and all
the status lights will ash to conrm
that your Powerline Adapter has been
reset.
Ethernet socket
Use this socket to connect your
Powerline Adapter to your router using
the Ethernet cable provided.
7
Reset
button
Pairing
button
Ethernet
socket