User guide

34 Part # 11313539 Rev. B
Configuring iScan Control Software
Preventing Sections of a BeadChip from being
Scanned
Ifyouwant,youcandeselectindividualstripswithinaBeadChip,preventin gthemfrom
beingscanned.
1 OntheICS Setupscreen,atthetopoftheBeadChipPreviewarea,selecttheBeadChip
whosesca nsettingsyouwanttochange.
Figure23BeadChipPreviewAreaontheICSSetupScreen(boxedatleft)
2 InthelowerpartoftheBeadChipPreviewarea,clickindividualstripsonthe
BeadChiptodeselectthem.Deselectedstripschangecolorfromlightbluetodark
grey.
WhenyouclickScan,aconfirmationdialogboxappears,informingyouthatsome
sectionswillbeskippedwhentherestoftheBeadChipisscannedandthat,ifany
stripwithinasampleontheBeadChipisdeselected,intensitydata(*.idatfiles)will
notbesavedforthatsample.
NOTE
AllsectionsofaBeadChipmustbescannedwhenusingLIMS.You
cannotremovesectionsfromthescan.